# Waist-to-Height Ratio Calculator + Chart (WHtR)

> Calculate waist-to-height ratio, read the 0.5 cutoff, and see how WHtR tracks abdominal fat and metabolic risk better than BMI alone.

- Canonical page: https://www.recompai.com/tools/waist-height-ratio
- Language: en
- Other languages: [es](https://www.recompai.com/es/tools/waist-height-ratio), [pt](https://www.recompai.com/pt/tools/waist-height-ratio), [de](https://www.recompai.com/de/tools/waist-height-ratio), [it](https://www.recompai.com/it/tools/waist-height-ratio), [fr](https://www.recompai.com/fr/tools/waist-height-ratio)

Enter waist and height to calculate WHtR and compare it with the half-height reference.

## What is the waist-to-height ratio?

Waist-to-height ratio is your waist circumference divided by your height in the same unit. It is a single, dimensionless number that places the fat you carry against the frame that carries it. In pooled screening studies it identifies people with diabetes, hypertension and dyslipidaemia better than BMI or waist circumference alone, and in prospective cohorts a higher WHtR is linked with higher all-cause mortality.

The Ashwell rule reduces the metric to a sentence: keep your waist below half your height. A WHtR under 0.50 is linked with fewer cardiometabolic risk factors in studies of men, women and several ethnic groups. Browning 2010, a review of 78 studies, supports 0.50 as the boundary, and NICE NG246 (2025) uses it as the start of increased central adiposity.

## Waist-to-height ratio categories

Four bands. Two cutoffs that matter.

Take care

< 0.40

Below 0.40. Under NICE’s healthy range.

Healthy

0.40–<0.50

0.40 to 0.49. NICE: healthy central adiposity.

Consider action

0.50–<0.60

0.50 to 0.59. NICE: increased central adiposity.

Take action

≥ 0.60

0.60 or more. NICE: high central adiposity.

## The waist-to-height ratio formula

Same number in any unit, as long as waist and height share the unit.

Metric

waist cm / height cm

86 cm / 178 cm = 0.483

Imperial

waist in / height in

34 in / 70 in = 0.486

Because the ratio is unitless, no conversion constant is needed. Mix-and-match is the only failure mode: never divide a centimetre waist by an inch height.

## Why WHtR outranks BMI for body recomposition

BMI averages weight over height squared. It is blind to whether the kilograms are muscle or fat and to where the fat sits. WHtR replaces the averaging with a coordinate: how much of your frame is taken up by abdominal storage. In pooled screening studies, that change makes it better than BMI at identifying cardiometabolic risk factors.

In Ashwell 2012 (Obesity Reviews, n>300,000), WHtR identified adults with diabetes, hypertension and cardiovascular disease better than BMI. In Schneider 2010 (two German cohorts, about 10,600 adults), people in the top quarter of WHtR had about 1.9 times the all-cause mortality of the bottom quarter. The Browning 2010 systematic review found 0.5 a suitable boundary for men and women across ethnic groups. Use BMI for body size; use WHtR for body shape; use both.

## The normal-weight person with a 0.55 ratio

Two adults with the same BMI can sit on opposite sides of the half-height line. BMI does not show where fat is stored; a tape measure and one division add that information.

In UK survey data, about a third of adults with a healthy BMI had a WHtR of 0.50 or more (Ashwell and Gibson 2016). BMI alone would not flag them. The pattern is sometimes called TOFI, thin outside, fat inside, and a tape measure is a cheap way to screen for it.

Visceral fat sits around the abdominal organs. It is linked with insulin resistance, unfavourable blood lipids and low-grade inflammation, independently of total body fat. Fat on the hips and thighs shows a weaker or even opposite link. WHtR is a simple proxy for central fat; BMI does not measure where fat sits.

Measure your waist at the same site and under similar conditions each month. Compare several readings rather than one result. A smaller waist may lower the ratio, but this calculator cannot predict how many centimeters you will lose, when it will happen or how your lab results will change.

## How to move WHtR with body recomposition

Ways to review your plan alongside waist and activity trends.

1.  01

    A modest calorie deficit, not a heroic one

    A moderate calorie deficit may support weight loss, but WHtR cannot show which fat stores will change or when. Choose an approach you can sustain and review weight, waist, training and recovery trends.

2.  02

    A 1.6 g/kg protein floor through the cut

    Lean mass can fall during a calorie deficit. A Morton 2018 meta-analysis found that extra protein stopped adding to resistance-training gains in lean mass at about 1.6 g/kg a day; Helms 2014 suggests higher intakes for lean, trained people in a deficit. Spread protein across meals.

3.  03

    Two to three resistance sessions a week

    Resistance training can help preserve muscle during weight loss. Combine it with activity and adequate nutrition for your needs, then review training, weight and waist trends. No number of sessions guarantees a WHtR change.

4.  04

    A monthly tape, the same conditions every time

    The trend is the data. Measure on a fixed weekday morning, hydrated, post-bathroom, before food. Take two readings, log the average. Day-to-day noise is real; month-to-month trend is the signal.

References: Morton RW, Br J Sports Med 2018; Helms ER, J Int Soc Sports Nutr 2014.

## Waist-to-height ratio questions, with the receipts

Eight questions that decide whether the tape becomes a habit or a number you forget by next week.

### What is a healthy waist-to-height ratio?

NICE classes a WHtR of 0.40 to 0.49 as healthy central adiposity, 0.50 to 0.59 as increased and 0.60 or more as high, for adults with a BMI under 35 (NICE NG246, 2025; the bands were first added in 2022). The 0.50 boundary is also supported by Browning 2010, a review of 78 studies across men, women and several ethnic groups, and by Ashwell 2012, a meta-analysis of screening studies in more than 300,000 adults. Pooled cohort data show mortality risk rising above about 0.50; there is no proven single “optimal” value below it.

### How is waist-to-height ratio different from BMI?

BMI is mass divided by height squared. It cannot distinguish 80 kg of muscle from 80 kg of fat, and it cannot tell whether the fat is around the liver or on the hips. WHtR captures the second dimension, where the fat actually sits. The Ashwell 2012 meta-analysis found WHtR better than both BMI and waist circumference at identifying adults with diabetes, hypertension, dyslipidaemia and cardiovascular disease. Use both. They answer different questions.

### How do I measure my waist correctly?

Use a flexible cloth or paper tape, standing relaxed with feet together. Exhale normally. Wrap the tape horizontally at the narrowest part of the torso, usually between the bottom of the rib cage and the iliac crest. For most adults this is just above the navel. Take the average of two consecutive measurements. Do not suck in, do not flex, do not measure over thick clothing. Measure at the same time of day each month for trend comparisons.

### Why is the 0.5 cutoff the same for men and women?

WHtR scales waist to height, so one boundary can apply to people of different sizes. Raw waist cutoffs differ by sex (102 cm men, 88 cm women in NIH guidance). Browning 2010 found a mean boundary of 0.50 for both men and women, and Ashwell 2012 found WHtR identified cardiometabolic risk factors better than waist circumference. NICE applies the same bands to children aged 5 and over.

### Should I use WHtR or waist-to-hip ratio?

Use both for different reasons. WHtR is one tape and one division, and the same bands apply to men and women. It captures whether central fat is high relative to your frame. Waist-to-hip ratio (WHR) requires the hip measurement and is sex-specific, but it captures the apple-vs-pear shape that WHtR cannot. In large studies, both are more closely linked with cardiometabolic risk than BMI. Checking both adds information.

### Can I lower my WHtR with exercise?

Exercise and nutrition can change waist circumference, but the amount and timing vary. Aerobic and resistance training support different goals; resistance training can help preserve muscle during weight loss. A tape measure cannot show which fat depot changed or predict your lab results.

### How often should I re-measure?

Monthly is the right cadence for adults. Day-to-day variation from food, gut content, hydration and posture swamps any single measurement; the trend across a few measurements is the real signal. Pick a fixed weekday morning, hydrated, post-bathroom, before food. Photograph the tape on your skin if you want a record that survives mistyped numbers. Weekly is fine during an active deficit; daily is noise.

### Does the WHtR cutoff change with age?

This tool uses the same 0.50 adult reference across ages. Waist and body composition can change with age, but the rate varies between people. Repeated waist measurements can show your trend; WHtR cannot predict your future visceral fat or health risk.

Recompose with Recomp AI

## Track your waist relative to half your height.

Recomp AI helps you log waist measurements, nutrition and activity over time. Compare repeated measurements under similar conditions when reviewing your plan.

[Download on the App Store](https://apps.apple.com/app/recomp-ai-body-recomposition/id6749103634?pt=127576777&ct=recompai_website&mt=8)

[Android waitlist](https://www.recompai.com/auth/sign-up)

## References

- [National Institute for Health and Care Excellence. Overweight and obesity management (NG246). NICE, 2025.](https://www.nice.org.uk/guidance/ng246)
- [Ashwell M, Gunn P, Gibson S. Waist-to-height ratio is a better screening tool than waist circumference and BMI for adult cardiometabolic risk factors: systematic review and meta-analysis. Obes Rev, 2012.](https://pubmed.ncbi.nlm.nih.gov/22106927/)
- [Browning LM, Hsieh SD, Ashwell M. A systematic review of waist-to-height ratio as a screening tool for the prediction of cardiovascular disease and diabetes. Nutr Res Rev, 2010.](https://pubmed.ncbi.nlm.nih.gov/20819243/)
- [Jayedi A, Soltani S, et al. Central fatness and risk of all cause mortality: systematic review and dose-response meta-analysis of 72 prospective cohort studies. BMJ, 2020;370:m3324.](https://pubmed.ncbi.nlm.nih.gov/32967840/)

## Related calculators

[Waist-to-Hip Ratio Adds the apple-vs-pear axis. Sex-specific.](https://www.recompai.com/tools/waist-hip-ratio)

[BMI Calculator Mass per height². Pair with WHtR to read both dimensions.](https://www.recompai.com/tools/bmi)

[Body Fat Calculator Estimate the fat share of body weight and track it alongside other signals.](https://www.recompai.com/tools/bodyfat)

[Track WHtR through a recomposition Why waist-to-height ratio can screen metabolic risk better than BMI, and how to track it over time.](https://www.recompai.com/resources/waist-height-ratio-metabolic-risk)

[Body recomposition calculator Estimate maintenance, a calorie and protein target, and a 12-week fat and lean-mass projection. Results depend on the model assumptions and your response.](https://www.recompai.com/body-recomposition-calculator)

## Related

- [All calculators](https://www.recompai.com/tools)
- [Body Recomposition Calculator: Calories, Macros, Timeline](https://www.recompai.com/body-recomposition-calculator)
- [Body Recomposition: Lose Fat and Build Muscle at Once](https://www.recompai.com/body-recomposition)

## Where to look next

- [Home](https://www.recompai.com/)
- [All calculators](https://www.recompai.com/tools)
- [All guides](https://www.recompai.com/resources)
- [Contact](https://www.recompai.com/contact) (recompaiapp@gmail.com)
- [Download on the App Store](https://apps.apple.com/app/recomp-ai-body-recomposition/id6749103634?pt=127576777&ct=recompai_website&mt=8)

- [llms.txt. A map of this site for agents.](https://www.recompai.com/llms.txt)
- [llms-full.txt. The expanded reference.](https://www.recompai.com/llms-full.txt)
- [sitemap.xml. Every canonical URL.](https://www.recompai.com/sitemap.xml)
